Page 1 of 1
Upgrade Regulator for AHP 201
Posted: Wed Jan 03, 2024 1:40 am
by vdotmatrix
Hi,
I am interested in replacing/upgrading my regulator.
Doesn't have to have the flow meter floating ball sightglass.
- IMG_2316.jpeg (3.27 MiB) Viewed 5487 times
This is what I have now.
- Image.jpeg (190.39 KiB) Viewed 5487 times
I kind fancy this Victor gauge.
Any ideas?
Re: Upgrade Regulator for AHP 201
Posted: Wed Jan 03, 2024 2:03 am
by tweake
any reason for the upgrade?
i would look at a dual output. just handy for purging.
Re: Upgrade Regulator for AHP 201
Posted: Wed Jan 03, 2024 2:19 am
by Jack Ryan
I realise it doesn't help you much but I am curious how that is an upgrade. I would go to the ball type rather than from it. Is what you have of poor quality - or broken - that you want to change?
Jack
Re: Upgrade Regulator for AHP 201
Posted: Wed Jan 03, 2024 2:45 am
by vdotmatrix
Jack Ryan wrote: ↑Wed Jan 03, 2024 2:19 am
I realise it doesn't help you much but I am curious how that is an upgrade. I would go
to the ball type rather than from it. Is what you have of poor quality - or broken - that you want to change? Tweak , Jack
The gauge said 400-500 psi forever and then my Aluminum welds started blackening like I didn't have any gas-i guess i didn’t have any gas.
This came with the AHP 201. I like big easy to read gauges. Anyone use this Victor regulator?
Re: Upgrade Regulator for AHP 201
Posted: Wed Jan 03, 2024 9:04 am
by cj737
I use those victor gauges on every tank I have (3 argon, 1 MiG, 1x oxy/acet) and have zero problems with them. Since you have two bottles currently, purging from the other is simple (another good reason to keep two bottles).