[LtBadd]

So I'm thinking of TIG welding with 309 for this, any other thoughts? The part is magnetic.

20191112_072522.jpg (29.86 KiB) Viewed 1144 times

20191112_072002.jpg (56.97 KiB) Viewed 1144 times

[cj737]

Why 309? Why not ER70? Best to also check the hardness of that part before welding it. May need to anneal/temper it.

[JayWal]

Gun bluing won’t work on 309 stainless will it? Since bluing is basically a controlled rust I believe. Correct me if I’m wrong..


Sent from my iPhone using Tapatalk

[LtBadd]

Went with the er70 as CJ suggested, part wasn't harden and no bluing will be applied.

20191112_130713.jpg (38.72 KiB) Viewed 1110 times

[Coldman]

Good repair, you won't have any probs with that.
I had an M17 Eddystone long time ago, the scope mount fell off, screws broke in the receiver. I was out in the bush and no way to work on it or get parts. So I went in the home base workshop and gave it the old blat blat with their mig straight onto the receiver, Er70S-6. Worked a treat. I left it that way for a couple of years till I traded it.

[Lightning]

[noddybrian]

I'd like to find something constructive to say about that but really at a loss for words ! if the responsible party is ever found they are truly in need of a pineapple !