Square wave 200 dc pulse issue
Posted: Mon May 20, 2019 10:34 pm
Hello all
New to the forum. Still learning the tig process.
Tonight I was working on a stand for my smoker running dc pulse at 1.5 got 10-12 welds ran when I wanted to then shut off pulse and my machine wouldn’t show my pulse setting. The light flashes but no readout on the display. Just shows amps. Any help would be great. Would call service but it is late.
New to the forum. Still learning the tig process.
Tonight I was working on a stand for my smoker running dc pulse at 1.5 got 10-12 welds ran when I wanted to then shut off pulse and my machine wouldn’t show my pulse setting. The light flashes but no readout on the display. Just shows amps. Any help would be great. Would call service but it is late.