Page 1 of 1
Torch Switch for a Lincoln Square wave 200
Posted: Fri Sep 28, 2018 3:06 pm
by Bobby0828
About a year ago I thought myself (with the help of Youtube) how to tie weld aluminum. I work as firefighter and fabricate various things for the department I work for. We build our own specialized brush trucks, which are converted from military vehicles. We just got a Stewart and Stevenson M1083 6x6 5-ton and we plan on converting. To get to the point, obviously I cannot table top weld everything for the truck. I need a torch switch for a Lincoln Square Wave 200. Can anyone give me any recommendations.
Re: Torch Switch for a Lincoln Square wave 200
Posted: Fri Sep 28, 2018 4:21 pm
by tungstendipper
Try here:
http://www.ckworldwide.com/wheel.html
Welcome! Thanks for your service!!
Re: Torch Switch for a Lincoln Square wave 200
Posted: Fri Sep 28, 2018 10:06 pm
by cj737
Another great option is:
www.6061.com Aaron’s Switch is variable amperage too.
Re: Torch Switch for a Lincoln Square wave 200
Posted: Sat Sep 29, 2018 8:49 am
by Warrenh
I have the squarewave 200 with the ck rotary switch and love it. I also have a push button on/off switch on the bottom side for anodized work. I switched the torch to a 200 amp size 26 because the size 17 got really hot. I found the torch, power cable and cable cover with the back caps and collets/bodies online for 85.00. That was a great deal. You do have to buy an adapter for the power cable to the dinse and it was 25.00. It also had a gas valve that helps save argon on the square wave because you can't control the post flow.
Sent from my SCH-I545 using Tapatalk
Re: Torch Switch for a Lincoln Square wave 200
Posted: Sat Sep 29, 2018 9:11 am
by Warrenh
I would also recommend getting this setup in the 25 foot length.
Sent from my SCH-I545 using Tapatalk