Page 1 of 1
how can i correct my welding?
Posted: Mon Apr 16, 2018 5:39 pm
by yhanie
]hi mate pleased help me how to operate the tig in aluminum. jaz wana ask how to get some techniques coz ive been welding whole day and doesnt do much about it.take a look.want seems to be the problem
Re: how can i correct my welding?
Posted: Thu Jun 07, 2018 1:42 pm
by slavikborisov
Check your shielding gas. 30-40 cfh should be okay. make sure you are welding on the correctly polarity. Clean aluminum with stainless wire brush very good to remove all oxides off the metal before welding. Frankly it could be a lot of things when posting this kind question write down your parameters with the questions and everything you did. Amperage; Gas Flow; Polarity: Type of Machine: Balance: AC frequency