Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
Micro Welding
Post Reply
exnailpounder
  • Posts:
  • Joined:
    Thu Dec 25, 2014 9:25 am
  • Location:
    near Chicago

20160823_125001.jpg
20160823_125001.jpg (45.2 KiB) Viewed 2183 times
Let's see your micro welds. Anybody can weld thick stuff. 8-) I actually used filler on this....i plucked a couple of wires out of a cup brush and fused them together and this is what happened. Look at that heat build up on the end. At 10 amps it's hard to back off the pedal.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Top
User avatar
  • Posts:
  • Joined:
    Thu Dec 26, 2013 12:41 am
  • Location:
    Laredo, Tx

I did a little build-up on this corner that had worn off from use. How is my ripple spacing??

Image
































































































Just Kidding, that's from Google. :lol: Nice work though.
Image
Top
exnailpounder
  • Posts:
  • Joined:
    Thu Dec 25, 2014 9:25 am
  • Location:
    near Chicago

:lol: ..you wish! Hell for that matter...I wish :lol:
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Top
User avatar

Oscar now has a laser outside under a tarp.. :lol:
Richard
Website
Top
User avatar
  • Posts:
  • Joined:
    Tue Dec 13, 2016 9:24 pm
  • Location:
    Clearwater Florida

Lol, took me a minute there.

I don't ever do micro welding sorry.... Used to the big stuff.
if there's a welder, there's a way
Top
Farmwelding
  • Posts:
  • Joined:
    Thu Mar 10, 2016 11:37 pm
  • Location:
    Wisconsin

Last time I blew a hole the size of a dime on razor blades and had arc strikes and blown holes on aluminum cans because the tig welder I use doesn't like low amps with 3/32" tungsten i guess. And maybe a little operator error and lack of experience too.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Top
User avatar
  • Posts:
  • Joined:
    Thu Dec 26, 2013 12:41 am
  • Location:
    Laredo, Tx

LtBadd wrote:Oscar now has a laser outside under a tarp.. :lol:
Wouldn't surprise me if one day I did, just for the hell of it. I mean, I have nothing else to spend my money on besides audio gear, so why not? :mrgreen:
Image
Top
User avatar
  • Posts:
  • Joined:
    Sat Mar 30, 2013 11:49 am
  • Location:
    Sweden

Smallest thing I ever welded. Sintered part of a torque wrench.
Two details reveals my stupidness. :mrgreen:
Screenshot_20170415-183110~2.png
Screenshot_20170415-183110~2.png (633.44 KiB) Viewed 2069 times
Top
User avatar
  • Posts:
  • Joined:
    Tue Dec 13, 2016 9:24 pm
  • Location:
    Clearwater Florida

AndersK wrote:Smallest thing I ever welded. Sintered part of a torque wrench.
Two details reveals my stupidness. :mrgreen:
Screenshot_20170415-183110~2.png
Cheesh. That's crazy
if there's a welder, there's a way
Top
WildWestWelder
  • Posts:
  • Joined:
    Mon Apr 03, 2017 7:43 pm

I used to know a guy who said he could weld anything from a filament in a light build to the crack of dawn.
Top
Farmwelding
  • Posts:
  • Joined:
    Thu Mar 10, 2016 11:37 pm
  • Location:
    Wisconsin

Anybody got any aluminum foil welds. I've always wanted to see those.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Top
exnailpounder
  • Posts:
  • Joined:
    Thu Dec 25, 2014 9:25 am
  • Location:
    near Chicago

WildWestWelder wrote:I used to know a guy who said he could weld anything from a filament in a light build to the crack of dawn.
i have "Hot-glued" a few cracks in my life....but i never claimed to be able to weld a light bulb filament.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Top
exnailpounder
  • Posts:
  • Joined:
    Thu Dec 25, 2014 9:25 am
  • Location:
    near Chicago

Farmwelding wrote:Anybody got any aluminum foil welds. I've always wanted to see those.
Are you guys fuckin welders or not :lol: Step up to the plate man! :lol:
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Top
Farmwelding
  • Posts:
  • Joined:
    Thu Mar 10, 2016 11:37 pm
  • Location:
    Wisconsin

exnailpounder wrote:
lwr wrote:Anybody got any aluminum foil welds. I've always wanted to see those.
Are you guys fuckin welders or not :lol: Step up to the plate man! :lol:
What do you want from me. I'd blow a hole in that so fast you couldn't catch it on a slo mo camera. And then if I did I wouldn't have any filler small enough. You step up and show me to do it then :lol:
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

AndersK wrote:Smallest thing I ever welded. Sintered part of a torque wrench.
Two details reveals my stupidness. :mrgreen:

Was that a little warm when you picked it up? (The classic answer is, "No. It just doesn't take me long to examine a weld...)
:lol:

Steve S
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Crazy old drunk I worked with some years ago always said there were three things he couldn't weld.

The crack of dawn, a broken heart, and the wheels on a miscarriage...

Steve S
Top
User avatar
  • Posts:
  • Joined:
    Sat Mar 30, 2013 11:49 am
  • Location:
    Sweden

Yup, a very quick inspection indeed. Long enough to transfer my prints to the piece though :mrgreen:
Top
Tom Osselton
  • Posts:
  • Joined:
    Sat Aug 15, 2015 12:33 am
  • Location:
    Calgary Alberta

At least it looked like a prints and not a toad! :D
Top
dirtmidget33
  • Posts:
  • Joined:
    Tue May 13, 2014 5:22 pm

Farmwelding wrote:Anybody got any aluminum foil welds. I've always wanted to see those.
Here you go posted some long time ago.
http://forum.weldingtipsandtricks.com/v ... ick#p78919

You can do these anyone can just a parlor trick nothing more
why use standard nozzles after gas lens where invented. Kinda of like starting fires by rubbing sticks together.
Top
Farmwelding
  • Posts:
  • Joined:
    Thu Mar 10, 2016 11:37 pm
  • Location:
    Wisconsin

dirtmidget33 wrote:
Farmwelding wrote:Anybody got any aluminum foil welds. I've always wanted to see those.
Here you go posted some long time ago.
http://forum.weldingtipsandtricks.com/v ... ick#p78919

You can do these anyone can just a parlor trick nothing more
Know what I'm doing Tuesday when I get back to school. Gosh... I haven't welded for over a week now. It's been a rough week to. A lot of wood split and moved to kill my back wishing the whole time I was sitting behind a torch or gun. It's a good thing that all I can think about is arc shots. Today it was downhill 6010 roots all day long in my head. Withdrawal will do crazy stuff to you
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Top
User avatar
  • Posts:
  • Joined:
    Tue Apr 11, 2017 10:31 pm

Willard Wigan creating micron-scale incredible works of art. Via his hands and a high-power microscope.

https://youtu.be/JSgfQ2rJItA
Purpose, then passion. Practitionership. Obsession and hard work. That's the discipline.
Top
Post Reply

Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”