Page 1 of 1

source for 1 lb. of 4943 ?

Posted: Tue Oct 25, 2016 12:59 am
by jethro
has anyone found a source for 1 or 2 lb. containers of the new 4943 filler ?
(or also the 4047 either)

It would corrode before I used 10 lbs. ......

Thanks,
Tim

Re: source for 1 lb. of 4943 ?

Posted: Tue Oct 25, 2016 2:38 pm
by rick9345
If there is an aluminium Boat Propeller repair shop in your area,check with them,as they usually use 4047&4943 to build up dirty,corroded damaged props.
10# mins is a lot for a small shop.

Re: source for 1 lb. of 4943 ?

Posted: Tue Oct 25, 2016 2:50 pm
by ldbtx
Here's 4047...

https://www.weldingsuppliesfromioc.com/ ... 4047-tn-bp

They also have 1/16" and 1/8".