rednation12
- rednation12
-
New Member
-
Posts:
-
Joined:Sun Oct 16, 2016 8:52 pm
Does anybody know where I can get once of those prop stands for Tig welding on Jody's last video thanks
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
Hourglassfab@yahoo.com or hit him up on Instagram if you have it- @hour.glass_ingenuity
Also, I got the email address above from the video itself-in the description. I know you don't want to read it but there is some good stuff in there at times. Other than that... Hope that if you get one it works out.
Also, I got the email address above from the video itself-in the description. I know you don't want to read it but there is some good stuff in there at times. Other than that... Hope that if you get one it works out.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
Or you could just make one:
I posted the video on this site a few times. If you want to watch where I got the idea I will find and post the video.
Found it:
https://www.youtube.com/watch?v=cLumr3Hs5xg
Get a very large bowl of popcorn and a 12 pack of beer as this is the extended (EP) version.
But you will probably get a few chuckles out of it along the way. But in the end, it's good info. Just can't figure out why the video is so long. 
- Dscf2919rs.jpg (47.98 KiB) Viewed 892 times
Found it:
https://www.youtube.com/watch?v=cLumr3Hs5xg
Get a very large bowl of popcorn and a 12 pack of beer as this is the extended (EP) version.
But you will probably get a few chuckles out of it along the way. But in the end, it's good info. Just can't figure out why the video is so long. 
- LtBadd
-
Weldmonger
-
Posts:
-
Joined:Sun Apr 12, 2015 4:00 pm
-
Location:Clearwater FL
-
Contact:
I've never seen one of these as a production item for sale, then again that doesn't mean it doesn't exist.
Making one is really the best option, the design is only limited by your imagination, it can be simple or as complex as you like. I would venture to say that no matter what design you decide on, and build, it won't work for every job. At some point you'll need something else, I've used a vice grip to clamp a flat bar to the weld table, a block of wood or aluminum to rest my hand on, propped my hand on the cylinder cap (argon cap, etc..)
No matter what you build please post some photo's here so we can see.
Making one is really the best option, the design is only limited by your imagination, it can be simple or as complex as you like. I would venture to say that no matter what design you decide on, and build, it won't work for every job. At some point you'll need something else, I've used a vice grip to clamp a flat bar to the weld table, a block of wood or aluminum to rest my hand on, propped my hand on the cylinder cap (argon cap, etc..)
No matter what you build please post some photo's here so we can see.
Richard
Website
Website
kiwi2wheels
- kiwi2wheels
-
Ace
-
Posts:
-
Joined:Sun Feb 17, 2013 10:27 am
That is part 2 of the video I linked above that I used to make mine.
It is where he further enhanced the tool with the offset piece.
- MinnesotaDave
-
Weldmonger
-
Posts:
-
Joined:Sun Oct 27, 2013 10:57 pm
-
Location:Big Lake/Monticello MN, U.S.A.
Also, a bar clamp to the table makes a vertical. Then a second clamp (clamped to the first) sticks out sideways.
It's what I use when I need a rest in a weird position or up high.
It's what I use when I need a rest in a weird position or up high.
Dave J.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
kiwi2wheels
- kiwi2wheels
-
Ace
-
Posts:
-
Joined:Sun Feb 17, 2013 10:27 am
I posted the wrong one .electrode wrote:That is part 2 of the video I linked above that I used to make mine.
https://www.youtube.com/watch?v=JiYeFfZO1MY