Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
The what I welded today (/whenever) thread (pics please)
Post Reply
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

sky
thanks for the tip.
is that a general rule or something you
figured on your own?
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

Craig, check out the u bend cutting fixture from Cone Engineering.... Simple and effective.
http://www.coneeng.com/tech_assist.html
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

rick
thank you, interesting site!
have you ever used any of their
products?
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

motox wrote:rick
thank you, interesting site!
have you ever used any of their
products?
craig
I've bought tubing and collectors, I'm going to buy that guide when I'm ready to fab my turbo headers
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Top
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

Just a repair on a small piece of our liquid filling equipment, 316L small double bevel, .035" filler...
Attachments
IMG_20160404_220106.jpg
IMG_20160404_220106.jpg (64.08 KiB) Viewed 1830 times
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Top
AFR_Autoworks
  • Posts:
  • Joined:
    Mon Nov 30, 2015 2:35 am
  • Location:
    Red Deer, Alberta, Canada

Just working on some 4" oval exhaust for a drift car. Tons of stainless practice.
Attachments
image.jpeg
image.jpeg (43.88 KiB) Viewed 1899 times
image.jpeg
image.jpeg (48.69 KiB) Viewed 1899 times
image.jpeg
image.jpeg (56.27 KiB) Viewed 1899 times
Top
User avatar
  • Posts:
  • Joined:
    Thu May 07, 2015 11:46 am
  • Location:
    KY.

Looks great.
Freddie
Top
Harry72
  • Posts:
  • Joined:
    Sun Nov 30, 2014 6:59 am
  • Location:
    Australia

Geeeze that must have cost a bomb to make in wages!
Top
AFR_Autoworks
  • Posts:
  • Joined:
    Mon Nov 30, 2015 2:35 am
  • Location:
    Red Deer, Alberta, Canada

It's really not as time consuming as you would think. There was allot of weld time and back purging involved but as for cutting, I have a good bandsaw which has cut my time at least in half. I can setup a cut, while it is cutting I debut and tack the previous piece.
Top
ex framie
  • Posts:
  • Joined:
    Sun Aug 09, 2015 1:09 am
  • Location:
    Brisbane QLD Land of oz

Always nice seeing quality work.
Pete

God gave man 2 heads and only enough blood to run 1 at a time. Who said God didn't have a sense of humour.....
Top
AFR_Autoworks
  • Posts:
  • Joined:
    Mon Nov 30, 2015 2:35 am
  • Location:
    Red Deer, Alberta, Canada

Got it all welded up today. Pretty happy with where my welds are at but I could still use some more practice. Also, my back purge could have used a bit more flow.
Attachments
image.jpeg
image.jpeg (42.06 KiB) Viewed 1774 times
image.jpeg
image.jpeg (60.27 KiB) Viewed 1774 times
image.jpeg
image.jpeg (54.64 KiB) Viewed 1774 times
image.jpeg
image.jpeg (49.89 KiB) Viewed 1774 times
image.jpeg
image.jpeg (48.13 KiB) Viewed 1774 times
image.jpeg
image.jpeg (69.11 KiB) Viewed 1774 times
Top
AFR_Autoworks
  • Posts:
  • Joined:
    Mon Nov 30, 2015 2:35 am
  • Location:
    Red Deer, Alberta, Canada

On a side note, anyone know how to rotate pictures? Every time I upload from my phone they are sideways
Top
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

I have the same problem. I'd like to read the answer to that one as well. I even tryed to rotate it before I downloaded it but didn't help.
I have more questions than answers

Josh
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Turn the phone 90* to take the picture?

Steve S
Top
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

Tried that too sometimes it works sometimes not. Just thought though I haven't tried cropping it first.
I have more questions than answers

Josh
Top
thespian
  • Posts:
  • Joined:
    Sun Mar 13, 2016 4:56 pm
  • Location:
    Indianapolis

Poland308 wrote:Tried that too sometimes it works sometimes not. Just thought though I haven't tried cropping it first.
If you are using photobucket ,I believe that there is a flip in the edit part of it.
Thespian is just an old username I have used forever , my name is Bill
Top
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

Little repair job 304L...not fun when you find someone did a previous repair with silver solider instead of welding... Makes damn mess.
Attachments
Damn silver soldered joint after striking and arc
Damn silver soldered joint after striking and arc
IMG_20160408_171822.jpg (53.61 KiB) Viewed 2035 times
Finally got it to take some filler
Finally got it to take some filler
IMG_20160408_172842678.jpg (49.38 KiB) Viewed 2035 times
Finished
Finished
IMG_20160408_173539951.jpg (54.29 KiB) Viewed 2035 times
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Top
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

Whipped up a bracket for a printer cleaning station for one of our lines...actually made 4 custom brackets depending on where they were mounting.
Attachments
IMG_20160408_233452708_HDR.jpg
IMG_20160408_233452708_HDR.jpg (45.37 KiB) Viewed 1981 times
IMG_20160409_212417200_HDR.jpg
IMG_20160409_212417200_HDR.jpg (49.27 KiB) Viewed 1981 times
IMG_20160409_212357149_HDR.jpg
IMG_20160409_212357149_HDR.jpg (44.29 KiB) Viewed 1981 times
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Top
User avatar

Rick_H wrote:Whipped up a bracket for a printer cleaning station for one of our lines...actually made 4 custom brackets depending on where they were mounting.
Nice work as always Rick, BTW did you bow the screens in the gas lens yourself?
Richard
Website
Top
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

LtBadd wrote:
Rick_H wrote:Whipped up a bracket for a printer cleaning station for one of our lines...actually made 4 custom brackets depending on where they were mounting.
Nice work as always Rick, BTW did you bow the screens in the gas lens yourself?
No that is how they are run on the Furick FUPA 12 set-up...
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Top
AFR_Autoworks
  • Posts:
  • Joined:
    Mon Nov 30, 2015 2:35 am
  • Location:
    Red Deer, Alberta, Canada

I use the same cup! I absolutely love my FUPA cups. Really hard to beat them.
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Today, I did the first "paying job" for our new company. It's simple stuff, but was urgent and I got paid well to do it on Saturday. For simplicity, I put it on my facebook wall.

https://www.facebook.com/steve.scott.39 ... 309&type=3

Steve S
Top
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

I'll have to take your word for it Steve as I don't do facebook.
Vic.
Flat out like a lizard drinkin'
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Coldman wrote:I'll have to take your word for it Steve as I don't do facebook.
Vic.
Member or no, it should let you see the pictures, as I have no privacy settings on it. At least it "used" to work that way.

I suppose I could put it in dropbox or on the cloud...

[edit] Screw it. I'll upload a few directly.

Steve S
Attachments
DSCF0018.JPG
DSCF0018.JPG (74.53 KiB) Viewed 1720 times
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Not sure how I uploaded that one, since I hit "reply" before I opened the file..
Here's the new bracket that replaced the previous turd.
DSCF0027.JPG
DSCF0027.JPG (56.27 KiB) Viewed 1721 times
Top
Post Reply

Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”