[shinya21]

My work place is currently using Weldman Model WE301T (attached is the specs for the machine) welding machine to weld inconel and there will be another welder coming next week and I had to get another machine for him. Since I'm going to buy a new machine, I was wondering if anyone can help to recommend any ESAB brand welding machine that had the same or better specification as the Weldman Model WE301T?

[soutthpaw]

Not sure your location, but ESAB had a brand new machine out. 301I. Might for the bill. http://www.esabna.com/us/en/news/latest ... bility.cfm

[shinya21]

Hi Soutthpaw,

Thanks for the reply, I'm from Singapore and currently looking up at ESAB Asia website and found Origo seems to be the machine I can use but I'm not sure which machine fits the one that I already have or even better, below are the links to the machine:

http://www.esabasia.com/asia/en/product ... ode=430595

http://www.esabasia.com/asia/en/product ... ode=430760

Do you have any advice?

[soutthpaw]

Hi Soutthpaw,

Thanks for the reply, I'm from Singapore and currently looking up at ESAB Asia website and found Origo seems to be the machine I can use but I'm not sure which machine fits the one that I already have or even better, below are the links to the machine:

http://www.esabasia.com/asia/en/product ... ode=430595

http://www.esabasia.com/asia/en/product ... ode=430760

Do you have any advice?

I would go for the 4300i. It looks like the most available amps and has DC pulse

[shinya21]

Thanks for the recommendation