I work with a Miller Syncrowave 250 with a #20 size watercooled flex torch with pedal control. I do a lot of jobs where I have to work around things or up on ladders where the pedal doesn't really come in handy, so I ordered myself a watercooled CK20 torch with the gas control on it. Switched the torches on my machine but not sure how to get the gas flow to work without using the pedal. Still fairly new to mechanics of the machines.
Here are my two torches and a pic of the face of my welder.
Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
I'd assume you have to put that in lift arc or touch start(always on) and unplug the pedal.
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
- big gear head
-
Ace
-
Posts:
-
Joined:Thu May 07, 2015 11:46 am
-
Location:KY.
There should be a switch on the machine for remote start. Turn it off. You may have to hook the torch hose directly to the flow meter.
Freddie
I have the amperage control set to panel instead of remote, same with output contractor. Tried unplugging the switch and still nothing. Was hoping it would be a convienient enough switch that I could use the remote when doing bench work and disable it for out of place jobs.
or remove pedal and wire a on/off button and attach to the torch, with post flow on and bumping the switch on/off can control the amperage at the weld.(manual pulsing)big gear head wrote:There should be a switch on the machine for remote start. Turn it off. You may have to hook the torch hose directly to the flow meter.
Credit where credit due "Thanks TamJeff" http://www.mcmaster.com/#pendant-switches/=yfvdjp -and- http://www.amazon.com/Insten%C2%AE-3-5m ... 81&sr=1-51 25ft mini cable
- Attachments
-
- DSCN0649.JPG (47.25 KiB) Viewed 1645 times
Everlast 250EX
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)
- Braehill
-
Weldmonger
-
Posts:
-
Joined:Sat Jul 06, 2013 11:16 am
-
Location:Near Pittsburgh,Pennsylvania. Steel Buckle of the Rust Belt
Hook the Argon hose directly to your flow meter as was suggested and when you're doing bench work you can hook it up to the machine, only takes a minute. Set the controls to panel and scratch start and you're good to go.
Len
Len
Now go melt something.
Instagram @lenny_gforce
Len
Instagram @lenny_gforce
Len
Options & solutions
nice to see your problem solved
nice to see your problem solved
Everlast 250EX
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)
Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities