Hello everyone, I am from Serbia.
What do you think of my root pass ?
done freehand, 4 mm gap, 2 mm wire. 2" pipe , wall thickness 4mm
feeding wire through gap
https://www.youtube.com/watch?v=-IdEu3Q_YaU
- TRACKRANGER
-
Weldmonger
-
Posts:
-
Joined:Wed Aug 06, 2014 12:48 am
-
Location:Melbourne, Australia
I think don't lean too far forward at the 9 O'clock position. Where's the safety rail?
EWM Phonenix 355 Pulse MIG set mainly for Aluminum, CIGWeld 300Amp AC/DC TIG, TRANSMIG S3C 300 Amp MIG, etc, etc
- TRACKRANGER
-
Weldmonger
-
Posts:
-
Joined:Wed Aug 06, 2014 12:48 am
-
Location:Melbourne, Australia
Yes, I meant the fence, it looks like a long way down!dejan717 wrote:OK thanks. I know that at the 9 o'clock root out a little too much, it's my left hand side.
What do you mean when you say "safety-rail" mean the fence.?
there's no fence, it's my dad's garage
Trev
EWM Phonenix 355 Pulse MIG set mainly for Aluminum, CIGWeld 300Amp AC/DC TIG, TRANSMIG S3C 300 Amp MIG, etc, etc