[Rick_H]

Here's the Tig I learned on...still use it at times..,

[Superiorwelding]

Very nice, what year is the high freq? I bet that will still work long after some of mine quit.
-Jonathan

[MinnesotaDave]

Nice setup Rick - your spark box has more features than mine.

Here's my first setup - that old Forney welds aluminum real good - nice soft arc

I use a big Airco now but still have the spark box.

image.jpg (65.65 KiB) Viewed 660 times

[Rick_H]

Thanks guys I'll have to look and see if I can find a year my father has had that over 20 years easily... Ive actually never seen another just like this, would love to find an old manual. The first thing I learned was tig alum and was off to the races from there. I guess I was always spoiled with a water cooled torch, still truly prefer them to this day.

I am actually happy I learned on an older style rig like this, truly taught me how to set up amps correctly and its scratch start... I remember the first time I used the Syncrowave 350lx at work that guys were complaining about...I just laughed and told them they had no idea..

If a guy wants to learn to weld I always start them on scratch start or lift arc.

[MinnesotaDave]

To find the manual go to millerwelds.com - that's where I found the manual for mine.

It's probably one like this?

http://www.millerwelds.com/om/o610g_mil.pdf

Or this: http://www.millerwelds.com/om/o610c_mil.pdf

[Rick_H]

Thanks Dave....you know I always thought it was just too old and never even looked on millers site...