help with tig cups

coldman · Wed Apr 16, 2014 7:25 pm

: 20140416_174536.jpg (30.68 KiB) Viewed 712 times

Happy Easter to all and thanks for all your interesting posts that keeps me informed.

I am having difficulty finding #5 stubby cups for my #26 stubby gas lense here in Oz. I have searched online everywhere I could think of. Here is a pic of the type of lense I am using.

Anyone got any ideas where I can get some online that will post down under?

mcoe · Wed Apr 16, 2014 7:38 pm

I like www.weldingcity.com for tig torch parts. I don't know if they ship globally though. Correct me if I am wrong and since I have no experience with this I probably am wrong but doesn't a stubby gas lense let you use a number 9 torch cup on it? I don't know I just heard that somewhere. I would check with welding city though.

coldman · Wed Apr 16, 2014 9:43 pm

Thanks. I checked out the weldcity site. They only have the 54N type lense cups which is longer than the stubby cup I am looking for. This is the problem I am having. I can get a #6 stubby cup but not smaller. I know they exist because I have seen them in the past. I just can't find where to get them.

Oscar · Wed Apr 16, 2014 10:05 pm

what series of cups do those gas lens use?

MinnesotaDave · Wed Apr 16, 2014 10:26 pm

Oscar wrote:what series of cups do those gas lens use?

They use the cups from a 9 series and 20 series torch.

coldman · Wed Apr 16, 2014 10:41 pm

Aha! No one has given me a definite confirmation of this before. This helps me narrow it down. I'll check it out. Thanks.

RichardH · Mon Apr 21, 2014 2:33 am

coldman wrote:Thanks. I checked out the weldcity site. They only have the 54N type lense cups which is longer than the stubby cup I am looking for. This is the problem I am having. I can get a #6 stubby cup but not smaller. I know they exist because I have seen them in the past. I just can't find where to get them.

Coldman,
My first stop is usually eBay. If you search for "TIG stubby kit" you'll get several hits with sizes down to #4 cup. I've had sellers allow substitutions on sizes to get more of the sizes I wanted in a kit, and they may be able to source you an entire box of the size you want. BTW, I believe you'll find that 17, 18, and 26 parts are interchangeable.

Cheers,
Richard

coldman · Mon Apr 21, 2014 8:34 am

Thanks Richard,
I have searched ebay extensively already. I tried again using your suggested text and came up with usaweld (kit) with expensive freight to Oz and a link to the riverweld site which I have searched before but this time came up with what looks like the right stuff at low cost. So I ordered it using rickshaw delivery from Honkers. I will let you know if it fits when it arrives.
Cheers!