Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
The what I welded today (/whenever) thread (pics please)
Post Reply
Simclardy
  • Posts:
  • Joined:
    Mon Jul 24, 2017 9:41 pm
  • Location:
    Cape cod mass

I just used dc and about 70-80 amps with a foot pedal.
Romex copper wire 14awg!

Sent from my SM-G930V using Tapatalk
Top
TraditionalToolworks
  • Posts:
  • Joined:
    Mon Dec 18, 2017 7:49 am
  • Location:
    San Jose / Kelseyville

Simclardy wrote:I just used dc and about 70-80 amps with a foot pedal.
Romex copper wire 14awg!
Those look nice! :)
Collector of old Iron!

Alan
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

i always wanted to try copper. what was your prep on the tubing?
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
Simclardy
  • Posts:
  • Joined:
    Mon Jul 24, 2017 9:41 pm
  • Location:
    Cape cod mass

motox wrote:i always wanted to try copper. what was your prep on the tubing?
craig
Not much. Deburr and wire brush, wipe it and go to town. It gets hot so i cooled it in a bucket every now and then and brush again. It's actually not that hard. It wets out nice, unlike brass/bronze.


Sent from my SM-G930V using Tapatalk
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

thank you1
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
Simclardy
  • Posts:
  • Joined:
    Mon Jul 24, 2017 9:41 pm
  • Location:
    Cape cod mass

They poured the basement walls at my house on wednesday and as a favour i repaired their chute. It had a nice layer of concrete i had to chip off.
The braided stainless wire wheel worked well to remove the encrusted concrete.
Over all it welded better than i expected.ImageImageImageImage

Sent from my SM-G930V using Tapatalk
Top
User avatar

Simclardy wrote:They poured the basement walls at my house on wednesday and as a favour i repaired their chute. It had a nice layer of concrete i had to chip off.
The braided stainless wire wheel worked well to remove the encrusted concrete.
Over all it welded better than i expected.[img]https://uploads.tapatalk-
Sent from my SM-G930V using Tapatalk
Good job!
Richard
Website
Top
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

When you can tell your wife your hobby saved you money,,,,,, priceless.
I have more questions than answers

Josh
Top
Simclardy
  • Posts:
  • Joined:
    Mon Jul 24, 2017 9:41 pm
  • Location:
    Cape cod mass

Poland308 wrote:When you can tell your wife your hobby saved you money,,,,,, priceless.
Lol

Sent from my SM-G930V using Tapatalk
Top
User avatar

A recent stainless job
20200421_194509a.jpg
20200421_194509a.jpg (69.32 KiB) Viewed 6054 times
20200421_194813a.jpg
20200421_194813a.jpg (54.29 KiB) Viewed 6054 times
Richard
Website
Top
tweake
  • Posts:
  • Joined:
    Mon Dec 18, 2017 4:53 am
  • Location:
    New Zealand

LtBadd wrote:A recent stainless job
20200421_194509a.jpg
20200421_194813a.jpg
:mrgreen:
very nice !
tweak it until it breaks
Top
VA-Sawyer
  • Posts:
  • Joined:
    Tue Jul 31, 2018 12:56 am
  • Location:
    Candler, NC

Richard,
Those look good. Doing those at home, or on the job?
No sense dying with unused welding rod, so light 'em up!
Top
User avatar
  • Posts:
  • Joined:
    Thu Dec 26, 2013 12:41 am
  • Location:
    Laredo, Tx

Simclardy wrote: It wets out nice, unlike brass/bronze.

Sent from my SM-G930V using Tapatalk
TIG'd a small brass fitting today. I absolutely hated it, lol.
Image
Top
TraditionalToolworks
  • Posts:
  • Joined:
    Mon Dec 18, 2017 7:49 am
  • Location:
    San Jose / Kelseyville

tweake wrote:
LtBadd wrote:A recent stainless job
20200421_194509a.jpg
20200421_194813a.jpg
:mrgreen:
very nice !
Indeed, very nice work indeed Richard! 8-)
Collector of old Iron!

Alan
Top
User avatar

Thanks, these were done in my garage shop
Richard
Website
Top
Simclardy
  • Posts:
  • Joined:
    Mon Jul 24, 2017 9:41 pm
  • Location:
    Cape cod mass

LtBadd wrote:Thanks, these were done in my garage shop
Nice work! What amperage did you need?

Sent from my SM-G930V using Tapatalk
Top
User avatar

I had my machine set on 150 amps with 300pps, 60% peak and 15% background, so not really sure what the weld amps would be, didn't need full pedal, used .045 filler with #8 cup and gas lens
Richard
Website
Top
Simclardy
  • Posts:
  • Joined:
    Mon Jul 24, 2017 9:41 pm
  • Location:
    Cape cod mass

LtBadd wrote:I had my machine set on 150 amps with 300pps, 60% peak and 15% background, so not really sure what the weld amps would be, didn't need full pedal, used .045 filler with #8 cup and gas lens
Thanks

Sent from my SM-G930V using Tapatalk
Top
Simclardy
  • Posts:
  • Joined:
    Mon Jul 24, 2017 9:41 pm
  • Location:
    Cape cod mass

I welded some black locust sil plates with a mortise and tenon. Milled with my Alaskan. ImageImageImageImage

Sent from my SM-G930V using Tapatalk
Top
BillE.Dee
  • Posts:
  • Joined:
    Mon Nov 27, 2017 8:53 pm
  • Location:
    Pennsylvania (Northeast corner)

i'd bet those beams weigh in at 1 - 380. Definitely hold the house down during a wind storm.
Top
TraditionalToolworks
  • Posts:
  • Joined:
    Mon Dec 18, 2017 7:49 am
  • Location:
    San Jose / Kelseyville

Nice Simclardy, do you guys have black locust up there? I know there's a lot down in West Virginia, but didn't realize it was up in your parts as well. I guess you've eaten enough sawdust running your Alaskan today... :lol:
Collector of old Iron!

Alan
Top
Simclardy
  • Posts:
  • Joined:
    Mon Jul 24, 2017 9:41 pm
  • Location:
    Cape cod mass

BillE.Dee wrote:i'd bet those beams weigh in at 1 - 380. Definitely hold the house down during a wind storm.
They are heavy!

Sent from my SM-G930V using Tapatalk
Top
Simclardy
  • Posts:
  • Joined:
    Mon Jul 24, 2017 9:41 pm
  • Location:
    Cape cod mass

TraditionalToolworks wrote:Nice Simclardy, do you guys have black locust up there? I know there's a lot down in West Virginia, but didn't realize it was up in your parts as well. I guess you've eaten enough sawdust running your Alaskan today... [emoji38]
We have them! They are considered non native/ invasive. But for sil plates they are wonderful. The sawdust smells like cow crap. And yes i have been eating it! Lol

Sent from my SM-G930V using Tapatalk
Top
BillE.Dee
  • Posts:
  • Joined:
    Mon Nov 27, 2017 8:53 pm
  • Location:
    Pennsylvania (Northeast corner)

LtBadd wrote:A recent stainless job
20200421_194509a.jpg
20200421_194813a.jpg
very nice ,, Richard. Are they some type of door latch/striker ??
Top
User avatar

BillE.Dee wrote: very nice ,, Richard. Are they some type of door latch/striker ??
Thanks Bill

No, all I know is it's called a Connecting Elevator Bracket
Richard
Website
Top
Post Reply

Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”