Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
Hey,
Welcome to the forum. There are a few Big Aluminium brains on here, so somebody should be along to help you directly.
Mick
Welcome to the forum. There are a few Big Aluminium brains on here, so somebody should be along to help you directly.
Mick
i find most of my burn thus at the end but i know why that is and im working on fixing it.....death grip+mashed peddle=burn thru.....
Life is not a journey to the grave with the intention of arriving safely in
a pretty and well preserved body, but rather to skid in broadside,
thoroughly used up, totally worn out, and loudly proclaiming
- WOW- What a Ride
a pretty and well preserved body, but rather to skid in broadside,
thoroughly used up, totally worn out, and loudly proclaiming
- WOW- What a Ride
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
On thin stuff, that's my preference... To start in a little way. Then, when I come back to it, I do that bit downhand and taper the heat off a lot to close the last bit.
Steve S
Steve S
foamballer
- foamballer
-
Active Member
-
Posts:
-
Joined:Fri Feb 15, 2013 3:57 am
-
Location:Australia
Which end is melting - start or finish? or both?
I agree with the other guy's suggestions. In addition, don't forget your filler rod! - you can use it to immediately fill the receding edges on startup and add that crucial little bit of metal that you need. When you get near the end and everything is about to go pear shaped (because you forgot to back off the pedal or didn't start your downslope early enough), you can leave the rod in the puddle to absorb some of the heat and make sure your weld doesn't keyhole too much.
I agree with the other guy's suggestions. In addition, don't forget your filler rod! - you can use it to immediately fill the receding edges on startup and add that crucial little bit of metal that you need. When you get near the end and everything is about to go pear shaped (because you forgot to back off the pedal or didn't start your downslope early enough), you can leave the rod in the puddle to absorb some of the heat and make sure your weld doesn't keyhole too much.
Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities