[UniqueTouch]

is it possible to use ck worldwide ck210v fx air on lincoln square wave tig 200. I just bought it which i got a great deal on it is 2 piece though. Anyway for me to use it? thank you for your help guys. Always very appreciated.

[Simclardy]

Not sure but ck worldwide has adapters for most machines. I bought an adapter for my everlast/ miller
Sorry could not give you a more definite answer

Sent from my SM-G930V using Tapatalk

[UniqueTouch]

Thanks for replying i appreciate it. Ive been looking just not sure. I saw one video whee the guy who owns a store showed an adapter for it he said screws into the port for the torch but i dont need how it could thread in. Hoping someone has done it and will know but again i do appreciate it.

[Simclardy]

https://weldfabulous.com/welding-suppli ... 1&brand=56

Lincoln Electric

Lincoln Electric K960-1 Twist Mate Torch Adapter

$74.99

I think this is the adapter you need

Sent from my SM-G930V using Tapatalk

[UniqueTouch]

Hey Sim thank you for replying i appreciate it very much. All i wanna do is weld 24/7 and use my new torch lol. I actually have that exact piece pretty much. My only problem is that I need a piece that I can take the wire connector off the tig torch electric connection wire and I need one that i can mate it with to connect to the dinse that i have.

[Simclardy]

The only other piece is the hose.
Am i missing something? Can you post a picture?
I know the feeling of wanting to weld and having to wait.
Cheers

https://weldfabulous.com/welding-suppli ... 1&brand=56


Sent from my SM-G930V using Tapatalk

[UniqueTouch]

Has that hose that connects but how can I connect the power supply

[UniqueTouch]

Disregard the Dinse in the bottom right of the picture. That is one I bought a while back just put it in the box so I don’t lose it

[UniqueTouch]

looks like im going to just gave to buy another house and dinse connector so much for getting this for 100 lol gonna cost me more now lol

[Simclardy]

The black hose is your power supply.
This is an air cooled torch? The power and argon hose are dual purpose. On water cooled you have 3 hoses. Cold h20, hot h20, and gas/power.

If you look at your machine, does the gas come from a separate port? Or from the power dinse connector? Ck makes adapters for both options.


Sent from my SM-G930V using Tapatalk

[UniqueTouch]

I have a lincoln square wave tig 200. Gas from the tank to the back of the machine.

[UniqueTouch]

21HPCA (2310-1879) that is the part number i believe i need but if my machine has the dinse connector ports on them how would I attach that and than plug it in? I dont know how to explain it unfortunately without being in person.

[Simclardy]

21HPCA (2310-1879) that is the part number i believe i need but if my machine has the dinse connector ports on them how would I attach that and than plug it in? I dont know how to explain it unfortunately without being in person.

I know, i wish i was there.
Look into your negative dinse port. Do you see a hole in the middle? That is where the gas comes out. Look at your positive dinse port and it should look different

Sent from my SM-G930V using Tapatalk

[Simclardy]

The part
21HPCA (2310-1879)
Is for converting a stick welder to scratch start. You don't need that part

Sent from my SM-G930V using Tapatalk

[UniqueTouch]

Yes there is a hole that goes through currently I have a ck130 that works on it but it is one piece ck torch. The ck210v I bought is a two piece. Which I didn’t realize until it came in the mail

[Simclardy]

I see. Did not realize they made a 2 piece. Can you return it?

Sent from my SM-G930V using Tapatalk