Stick Welding Tips, Certification tests, machines, projects
Rod sticks, won't start bead..
Post Reply
Welding2013
  • Posts:
  • Joined:
    Fri May 31, 2013 11:41 am

welding 1/8 in steel that has galvi. coating that I have sanded off. when I scratch rod it just sticks and won't start bead.

is my setting to low, too high? I'm using 6011, AC machine (duel range) It's an older machine that's been cleaned up.

any suggestions?
Top
GWD
  • Posts:
  • Joined:
    Fri Feb 26, 2010 8:50 pm
  • Location:
    Northern CA

Sanding usually isn't enough. Use a grinder on both the work and the stinger contact points.

Turn up the amps until the rod starts. Usually, 6011 starts extremely easy compared to other rods.
Top
User avatar
  • Posts:
  • Joined:
    Sun Oct 27, 2013 10:57 pm
  • Location:
    Big Lake/Monticello MN, U.S.A.

Welding2013 wrote:welding 1/8 in steel that has galvi. coating that I have sanded off. when I scratch rod it just sticks and won't start bead.

is my setting to low, too high? I'm using 6011, AC machine (duel range) It's an older machine that's been cleaned up.

any suggestions?
You didn't post the rod size and amps you've been trying.

What is your overall background in stick welding?
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Top
Welding2013
  • Posts:
  • Joined:
    Fri May 31, 2013 11:41 am

3/32 rod, E6011, 75 amps low range. i used a grinder with sand paper disks, 80 grit. I will try cleaning up the ground/stinger contact areas.
Top
Post Reply

Return to “Stick Welding/Arc Welding - Shielded Metal Arc Welding”