passed my first bend test
Posted: Thu Oct 30, 2014 12:02 am
Passed my first bend test for school tonight. V groove with a backing strap welded with 7018.
Nice!
Sent from my SM-T537R4 using Tapatalk
Welding Tips and Tricks
The Forum
https://forum.weldingtipsandtricks.com/
passed my first bend test
https://forum.weldingtipsandtricks.com/viewtopic.php?f=4&t=6261
Page 1 of 1
Re: passed my first bend test
Posted: Thu Oct 30, 2014 2:06 am
Re: passed my first bend test
Posted: Thu Oct 30, 2014 8:33 am
Congrats.
Re: passed my first bend test
Posted: Thu Oct 30, 2014 6:53 pm
Well done!
Funny how a face-bend shows you the edge of the weld, isn't it? It's the difference in hardness between the parent metal and the filler that makes those little lines show up.
What position was the weld?
Steve S
Funny how a face-bend shows you the edge of the weld, isn't it? It's the difference in hardness between the parent metal and the filler that makes those little lines show up.
What position was the weld?
Steve S
Re: passed my first bend test
Posted: Fri Oct 31, 2014 10:33 am
Way to go Phoenix!!Re: passed my first bend test
Posted: Sun Nov 02, 2014 9:03 pm
Flat. I'm in a two year course that will cover stick, mig, and tig. I had some core ed classes also, math, English, computers, and psychology. Should be looking for a job doing stick by Christmas.