Awesome, I get to check some 6010 beads. Which machine did you use?
I started to get really pissed at that tombstone and haven't used it for a couple of days. I'm trying to get something better.
I figured out that if you use old hobart electrodes, you have to have 3 sharpened chipping hammers because they will quickly become blunted from all the laborious hammering and you will get sick of constantly having to stop to resharpen the blunted heads.
Dipping the rods in the cooling bucket seems to help keep them from cracking and burning. I don't know how long to dip them but at least I try to remember not to dip them while they are still in the stinger. Although the water is safely contained in a non-conductive plastic bucket, right?
I am planning to barbeque some 7018's. I hear they smell like chicken, we will see.
I am also waiting on the new tombstone review from John. He doesn't have the welder at the moment. For all I know, there is actually something wrong with mine? Do you have the AC/DC model tombstone? I can't remember, but I think so?
ok, let me check all these beads with my inspection flashlight. Is that some undercut I see, hmmm?
No, actually what I see is a lot of splatter, not undercut. I'm sure it's just magnified. Since you didn't go over 90A, I was wonder what you had the arc control set on? Maybe that was set too high for the 6010. The way I understand it is that in the flat position, you want to have it in maybe the lower 1/3 of the selection range or you will have a lot of popping. IDK ... or 2/3rds for out of position. Maybe I have it wrong. I think 7018 is always to be set 2/3rds to 3/3rds of the range, no matter what.
These are some pretty nice beads. I would like to see a few vertical beads. I made one that was pretty good but it was like it sucked my welder dry. I could almost see the sides of the tombstone bending in on the 2nd electrode and it became more difficult for me to hold the arc. I wish I could get better at this.
I also use the counter-clockwise circles while traveling left to right. I really don't know these other techniques. I would like to see beads comparing them, tho ... where is John with his video of some of those cool-ass hand positions ??
I came up with a 6010 splatter protection device for my left forearm. It's a CD holder for a car visor, covered with aluminum foil taped over the exposed side. I can also easily slide it up and spin it to cover the inside of my forearm. I'm looking for something to cover my vise grips with, because they are becoming coated in the stuff. I guess I know what I'll continue to use this pair for. I ground them clean and the same thing happened again, so fast. I don't want to use high dollar splatter spray with I don't have, for my practicing. Maybe if I rub some muddy read clay on them which I could rinse off afterwards?
nyc7018 wrote:I told mbmalone that id try to run some 6010 next time i welded. Well...yesterday was that day.
School has been out for a little and i havent had a chance to burn some rods so i started with 6010 beads. 1/8 rod, 80-90 amps, flat position.
I had an old piece laying around that i used to practice T joints on so i just burned on top of that. I left the plate dirty as hell.
I dont think there's much undercut. It looks like i undercut the heck out of it but im pretty sure thats just mill scale and slag. If i used a wire wheel i think itd be better, but all i had was the good old chipping hammer and wire brush.
I started pretty straight and then i dont know what the hell happened hahaha. I dragged some, i did little script E motions/circles, and i moved around in a ( motion on others.
Just some practice beads on sh*t metal to show mbmalone what 6010 looks like when i do it.
And as a tombstone owner, Im looking forward to AK's tombstone review as well!!
