https://youtu.be/Jh8JBA381ns
- 20220502_202409.jpg (4.08 MiB) Viewed 12492 times
- 20220502_202412.jpg (4.19 MiB) Viewed 12492 times
- 20220502_202435.jpg (5.62 MiB) Viewed 12492 times
Timber Wolf
- Timber Wolf
-
New Member
-
Posts:
-
Joined:Sat Jul 24, 2021 9:31 pm
Ok, this is like, really belated. But it's more or less a follow up to an old post I did about the E6020. In that time I actually managed to get my hands on a box of these extinct welding rods. Albeit that was several months ago. Nabbed a box that popped up on Ebay.
https://youtu.be/Jh8JBA381ns
https://youtu.be/Jh8JBA381ns
Timber Wolf
- Timber Wolf
-
New Member
-
Posts:
-
Joined:Sat Jul 24, 2021 9:31 pm
Bruh... I collect welding rods. It literally doesn't matter. I'm out to find, test, collect and document them. All position or not. It's a hobby of mine.
Timber Wolf
- Timber Wolf
-
New Member
-
Posts:
-
Joined:Sat Jul 24, 2021 9:31 pm
To me the E6020 is a rare gem of a welding rod. They are no longer manufactured and are virtually impossible to find. But I digress.
Timber Wolf
- Timber Wolf
-
New Member
-
Posts:
-
Joined:Sat Jul 24, 2021 9:31 pm
My biggest one is the Cormet F40 that weighs about 8 lb is overall about an inch in diameter and is nearly four feet long lol. Someday when I get a place to store it that isn't in the Soggy garage I'll take it out of its protective tube and hang it on the wall.