[scallawagswag1]

I am very new to brazing. I need to braze yellow brass to to yellow brass, but don't want the silver look.. Does anyone know of a brazing stick that has a gold look to it that will work with yellow brass? I cant seem to find one with the right melting temp. Im using an oxy ace setup by the way. Thank you so much for your help

[rake]

http://www.jlsmithco.com/SOLDERING/SILVER-SOLDER-HARD

[weldin mike 27]

http://www.hobartwelders.com/weldtalk/a ... 38712.html

[weldin mike 27]

Apparently you can colour the joined area afterwards to better match the base metal.

[Hvacr]

There is brazing material made by Harris that is 45% silver, the version i am describing comes in a coil, not a rod and when done brazing it has a brass color. You can usually purchase a small quantity, but if you are brazings lots of brass it also comes in a large coil. The diameter is about the same a baleing or mechanics wire. If you have a local HVAC vendor or distributoe close by u will find it there.

[scallawagswag1]

Thanks guys I really appreciate the advice.