Stick Welding Tips, Certification tests, machines, projects
Adam's Got Skills
- Adam's Got Skills
-
Guide
-
Posts:
-
Joined:Sun Aug 10, 2014 3:32 pm
Hey guys I got this rod from a buddy who had about 5lbs of i believe 1/16" 7010-A1. I think it's a Lincoln rod mainly cuz it has three green dots on it in the middle kinda like my excalibur. But they were NOT in a labeled container. An I can't seem to find anything on a 7010-A1 this size....mainly just what current they run at. Any ideas?
- Attachments
-
- 20140917_173520.jpg (112.1 KiB) Viewed 4413 times
Heres some info I found
http://pnumbers.com/onlinepackages/fmc/ ... lassId=269
And from Lincoln
Shield-Arc 85 E7010-A1 DC+ Need a reliable, all-position stick electrode? Here’s your electrode! Shield-Arc 85 produces a 70,000 psi, 1/2% molybdenum weld deposit for use on 1/2% molybdenum pipe steels and API 5LX-42 through X-56 line pipe.
http://pnumbers.com/onlinepackages/fmc/ ... lassId=269
And from Lincoln
Shield-Arc 85 E7010-A1 DC+ Need a reliable, all-position stick electrode? Here’s your electrode! Shield-Arc 85 produces a 70,000 psi, 1/2% molybdenum weld deposit for use on 1/2% molybdenum pipe steels and API 5LX-42 through X-56 line pipe.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
A 7010 will run almost identical to a 6010.
In 1/16, I agree with Wes917, I'd start at 50, and adjust. Depending on the machine, I'd expect to adjust "down" toward 40 amps. The smaller the rod, the less our recommendations mean, as the differences in machines show up more in smaller rod.
Steve S
In 1/16, I agree with Wes917, I'd start at 50, and adjust. Depending on the machine, I'd expect to adjust "down" toward 40 amps. The smaller the rod, the less our recommendations mean, as the differences in machines show up more in smaller rod.
Steve S
Adam's Got Skills
- Adam's Got Skills
-
Guide
-
Posts:
-
Joined:Sun Aug 10, 2014 3:32 pm
Thanks guys I'll give it a shot sometime here soon. I was looking thru a Lincoln consumables book even but i couldn't find any listing of 1/16"...Cool
Adam's Got Skills
- Adam's Got Skills
-
Guide
-
Posts:
-
Joined:Sun Aug 10, 2014 3:32 pm
Im still excited i scored these for free. I've never needed a 7010 for anything....YET. An 1/16" seems like a doubt able size for most stuff I do...But idk maybe i can at least play with em. What have you guys done that would require a small rod like that? Seems like with that small u better have a pretty tight fit up. So maybe for fun...if anyone has ideas of somethin to build or some kind of practice using these...let me steal your ideas! haha thanks
Justjake85
- Justjake85
-
New Member
-
Posts:
-
Joined:Tue Aug 12, 2014 11:05 am
I run mine:
3/32 - 50-55 amps
1/8 - 75-80 amps
5/32 - 80-90 amps
I run on a crisp setting at +2 as well.
Hope this helps!
3/32 - 50-55 amps
1/8 - 75-80 amps
5/32 - 80-90 amps
I run on a crisp setting at +2 as well.
Hope this helps!
- MinnesotaDave
-
Weldmonger
-
Posts:
-
Joined:Sun Oct 27, 2013 10:57 pm
-
Location:Big Lake/Monticello MN, U.S.A.
He has 7010 electrodes, not 7018.Tater wrote:Dry it in a wire oven or household oven before you use the 70XX electrodes.
7010's don't go in the oven.
http://www.lincolnelectric.com/en-us/su ... etail.aspx
Dave J.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
As for the use of 1/16" xx10 rod, how about root-pass in small-bore (1" and under) socket-weld pipe?
That's the only place I've ever seen it called out, and the only place I've ever used it.
Steve S
That's the only place I've ever seen it called out, and the only place I've ever used it.
Steve S
Return to “Stick Welding/Arc Welding - Shielded Metal Arc Welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities