http://www.youtube.com/watch?v=UP8hh0yQibM
These arc shots kick Jody's butt!!!
There's a bunch of 6010 rooting and 7018 capping with great arc shots!!!
Every stick welder needs to see this video!!!
This guy is a WELDOR!!!!! dripping with skill!
~John
Stick Welding Tips, Certification tests, machines, projects
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
- the_brawnyman
-
New Member
-
Posts:
-
Joined:Thu Feb 13, 2014 3:13 pm
-
Location:Gate City, Va
Ole steve bleile! I have their arc welding II on DVD. It's pretty solid in my opinion. I am a beginner and these videos by Wall Mountain have been a great help.
Thumbs up for the info dude!
Sent from my iPhone using Tapatalk
Thumbs up for the info dude!
Sent from my iPhone using Tapatalk
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
Hey,
That guy has been around for years. His vids have been stolen lots too by the look of it. Hell of a mustache as well.
Mick
That guy has been around for years. His vids have been stolen lots too by the look of it. Hell of a mustache as well.
Mick
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
Aren't those arc shots and clearness of the puddle amazing?
I found the 6010 rooting in that video very nice.
Every stick weldor needs to see that video!!!
~John
I found the 6010 rooting in that video very nice.
Every stick weldor needs to see that video!!!
~John
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
- admin
- Site Admin
-
Posts:
-
Joined:Mon Jun 01, 2009 8:54 am
-
Location:Atlanta, GA
-
Contact:
I have owned Steve's videos for several years and have recommended them to anyone who asked where to get good welding videos. Some of the best arc shots I have seen and very affordable videos. Sounded a little too happy when you said he kicks my butt lol
Jody
Sent from my iPhone using Tapatalk
Jody
Sent from my iPhone using Tapatalk
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
Hey, no hard feelings Jody.
I meant he has the best "stick welding" arc shots.
Nobody beats your tig arc shots.
~John
I meant he has the best "stick welding" arc shots.
Nobody beats your tig arc shots.
~John
Last edited by AKweldshop on Sun Mar 30, 2014 5:52 pm, edited 1 time in total.
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
I am one of your greatest fans.....
Can you possibly do a bunch of 3/8 plate stick welding tests?
1g, 2g, 3g, and 4g, open root 6010, 7018 fill and cap. "whip-n-pause and bury-rod", weaves and stringers....
Those videos would be a help to me, and a help to a lot of other people that are going to take these tests....
~John
Can you possibly do a bunch of 3/8 plate stick welding tests?
1g, 2g, 3g, and 4g, open root 6010, 7018 fill and cap. "whip-n-pause and bury-rod", weaves and stringers....
Those videos would be a help to me, and a help to a lot of other people that are going to take these tests....
~John
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Steve and Vicki are great people if you ever get to meet them. AK, I'm not slamming you here, so don't take offense but, the problem with this video is that 1) It's copyrighted and 2) This Russian idot on YouTube continues to illegally post Steve's welding videos. Steve's welding videos are for sale on his website and that YouTube poster knows it. Most people like you and me, simply go to YouTube to learn and be entertained. I know your posting of the link meant no harm. That Russian guy shouldn't be posting somebody else's livelyhood when it's not made to be passed out for free. I think in the music industry they refer to it as "piracy."
By the way, yes Steve's techniques and skill level are quite fabulous.
By the way, yes Steve's techniques and skill level are quite fabulous.
"Let's light the fire an' brief on guard.". RIP Lt. Col Stan "Red Dog" Nichols. USMC. Fighter Pilot. Korea, Vietnam. MCAS El Toro.
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
Ok, But I just put it on here for somebody's to see.
I think that video is worth a pocket full of welding classes.
Steve explains every aspect of what he's doing, and shares a shocking amount of knowledge.
He is a great help to newbs and not so newbs.
John
I think that video is worth a pocket full of welding classes.
Steve explains every aspect of what he's doing, and shares a shocking amount of knowledge.
He is a great help to newbs and not so newbs.
John
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Yup, you're absolutely right!AKweldshop wrote:Ok, But I just put it on here for somebody's to see.
I think that video is worth a pocket full of welding classes.
Steve explains every aspect of what he's doing, and shares a shocking amount of knowledge.
He is a great help to newbs and not so newbs.
John
"Let's light the fire an' brief on guard.". RIP Lt. Col Stan "Red Dog" Nichols. USMC. Fighter Pilot. Korea, Vietnam. MCAS El Toro.
maintmech1245
- maintmech1245
-
New Member
-
Posts:
-
Joined:Sun Jul 28, 2013 8:59 pm
-
Location:Nevada
Another good video with great arc shots is Under the Hood, by a Boilermaker from Louisiana. Shows a tig root and hot pass with 7018 fill and cap on 2" pipe, and 6010 root and hot pass (downhill and up) with 7018 fill and cap on 6" pipe. Not nearly as much explanation as Jody or Steve does ( I own his vid too), but its awesome for someone new to pipe, especially in-plant pipe. Of course, you have to pay for it, but it's very reasonable.
Arizona SA200
- Arizona SA200
-
Ace
-
Posts:
-
Joined:Thu Jan 30, 2014 8:28 pm
-
Location:Arizona
It is sad to say in this internet world that the guy in Russia has full legal rights to post Steve's videos because the copyright laws don't apply. I'm not saying its right just saying. I like the fact that the founder of this site has his videos posted on youtube by HIMSELF for us to view. You can purchase his videos in a collection on DVD to support his cause. I personally have chosen to support him in purchasing his tig fingers and they work great when i remember i have them in the truck.
I stack dimes for a living so i can stack dollars for a paycheck.
Jody, I have to commend you for the classiest response to what could literally be taken as a slap to the face in your own house.
Bill
Bill
Lincoln Electric v155s with TIG pack (lift start)
Lincoln Electic Viking 3350 Helmet
One father's love for his autistic son... http://www.inmyimage.com
Lincoln Electic Viking 3350 Helmet
One father's love for his autistic son... http://www.inmyimage.com
Return to “Stick Welding/Arc Welding - Shielded Metal Arc Welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities