Page 1 of 1
TIG pedal
Posted: Tue Sep 18, 2018 7:48 pm
by moostang
I was wondering if anyone could tell me if the Vulcan TIG pedal will work with the Lincoln LE31MP. I realize a name brand one would probably be better quality, but for occasional home use it doesn’t seem to bad.
Re: TIG pedal
Posted: Wed Sep 19, 2018 10:48 pm
by Poland308
The ohm range and the wire plug would need to match.
Re: TIG pedal
Posted: Thu Sep 20, 2018 7:26 am
by moostang
I can’t find much information about either one of them. The one that is for my welder is K4361-1 and I can’t even find it on the Lincoln site. I’m going to go to harbor freight and compare the plugs but I don’t know what the ohms are for either one.
Re: TIG pedal
Posted: Thu Sep 20, 2018 5:06 pm
by Poland308
It should be listed in your manual. I would recommend a call to ck worldwide tech support. If you have your machine mn they can probably answer your questions about what your machine needs.
Re: TIG pedal
Posted: Fri Sep 21, 2018 8:24 am
by moostang
Okay thank you. I’ll do some more research.