Page 1 of 1
Lincoln wire feed work with miller?
Posted: Sun Feb 12, 2017 8:10 pm
by Roberto_236
Hey guys, I'm wondering if a Lincoln power feeder 15m would work with a miller xmt 350?
Re: Lincoln wire feed work with miller?
Posted: Fri Mar 17, 2017 12:53 pm
by Jacked800
I run an older LN7 off my Trailblazer and works great. When I first got the LN7 I looked everywhere for information about hooking the two up and found absolutely nothing except the wiring diagrams for both units. I bought a 14 pin plug on ebay and took my best guess at it. Didn't work but I switched two wires around and been running now for about 3 years now. Don't know if this information will help with your situation but .....