[AKweldshop]

I finally bought one of these 3 or 4 months ago.

It's about 3/16" thick, so will fit in pretty much any helmet....

Arc color is an amber shade, and is really a good shade for seeing.

I've used it for mig (hard wire), stick (6010/7018 etc) duelshield, and aluminum mig.
Has never flashed me.
I've been welding in a lot of tight, poor visibility places, and it has stayed consistent.
Highly recommend.

I know, I've been a long time defender of fixed shade lens, but really, it's the 21st century.
Some jobs are just plain and simple easier with AD....


http://www.amazon.com/ArcOne-T240-10-Tr ... lding+lens

IMG_2675.JPG (73.93 KiB) Viewed 2720 times

IMG_2676.JPG (56.79 KiB) Viewed 2720 times

IMG_2913.JPG (90.04 KiB) Viewed 2720 times

[AKweldshop]

IMG_1693.JPG (36.56 KiB) Viewed 2721 times

IMG_1708.JPG (95.45 KiB) Viewed 2721 times

IMG_1665.JPG (135.99 KiB) Viewed 2721 times

[AKweldshop]

IMG_1544.JPG (138.94 KiB) Viewed 2722 times

IMG_0382.JPG (109.72 KiB) Viewed 2722 times

IMG_3154.JPG (43.59 KiB) Viewed 2720 times

[weldin mike 27]

Vertical up gal pipe to wood joint. You boys are talented up in AK.

[Otto Nobedder]

John,

That's a good price to have 5 stars across 70 reviews!

I'll have to dig for a 4 1/2 X 5 version. Hell, I might change centuries at a price-point like that.

Steve S

[AKweldshop]

Vertical up gal pipe to wood joint. You boys are talented up in AK.

You know what I'm doing right there, right?

Here's the thread. http://forum.weldingtipsandtricks.com/v ... f=9&t=7404

[weldin mike 27]

Sorry, it was a poor attempt at humour. It failed.

[AKweldshop]

Sorry, it was a poor attempt at humour. It failed.

I knew it was humor. And I got a chuckle out of it.
I just wasn't sure if you had seen the thread and knew the purpose of that pipe and wood.

[weldin mike 27]

Tapatalk messed up the pictures when you first posted, so I never did see that the first time. Thanks for the link.

[Adam Mc Laughlin]

Terrific review - I've been shopping for an AD for my pipeliner and this is the feedback I was looking for
Thank you !


Sent from my iPhone using Tapatalk

[AKweldshop]

Terrific review - I've been shopping for an AD for my pipeliner and this is the feedback I was looking for
Thank you !

Glad I could help.

[Adam Mc Laughlin]

Hi Guys

So... I got the Arc One AD lens that goes to a shade 11

http://www.amazon.com/ArcOne-S240-11-2- ... op?ie=UTF8

This one lens was $110. I bought it to use in my pipeliner hood.
First things that I found was that when I try to use it with TIG.. it flashed you good.
Ok, I am going to cut it some slack because TIG welding on the lighter materials uses so little current the sensor would have a hard time sensing the arc

Tried it with MIG
Getting flashed on every time that I start the arc as well. Tried this with the MIG machine set up for 1/8" materials

Hummmmmm

Yet I see that the closest relative ( which costs 1/2 of the price of the shade 11 unit ) seems to get consistent 5 star reviews

http://www.amazon.com/ArcOne-T240-10-Tr ... +darkening

Has anyone else had this experience?

Adam

[AKweldshop]

Hi Guys

So... I got the Arc One AD lens that goes to a shade 11

http://www.amazon.com/ArcOne-S240-11-2- ... op?ie=UTF8

This one lens was $110. I bought it to use in my pipeliner hood.
First things that I found was that when I try to use it with TIG.. it flashed you good.
Ok, I am going to cut it some slack because TIG welding on the lighter materials uses so little current the sensor would have a hard time sensing the arc

Tried it with MIG
Getting flashed on every time that I start the arc as well. Tried this with the MIG machine set up for 1/8" materials

Hummmmmm

Yet I see that the closest relative ( which costs 1/2 of the price of the shade 11 unit ) seems to get consistent 5 star reviews

http://www.amazon.com/ArcOne-T240-10-Tr ... +darkening

Has anyone else had this experience?

Adam

I bought the second one you have there for $55.

I Love it. Can't comment on the higher priced one, but I would hope it would be better. I guess not.

[Otto Nobedder]

Perhaps, Adam, you received a defective one?

I'd think, if you're dissatisfied with it, I'd contact the company and arrange an exchange. It's not a bad product until two of them are bad....

Steve S

[Adam Mc Laughlin]

Well I got my lens that goes to shade 10.5 in the mail today

I charged it up in the summer sunshine this afternoon

I'll give it a run this weekend , and if it's night and day better than the edition that darkens to 11 I'll call the company and ask for an exchange or check-out return shipping authorization

Side note

Does anyone here use the shade 10.5 with a slightly darker lease on the inside of the hood like a shade 1?

Adam



Sent from my iPhone using Tapatalk

[Otto Nobedder]

I knew a guy who used a shade 9 fixed lens, and when he wanted darker he'd where dark safety glasses with it. These can be found as dark as equivalent to shade 3 (though I've never seen them labeled that way) for about shade 12 welding.

Steve S

[Adam Mc Laughlin]

The welding inspector at my work wears a shade 9 by itself for his full time arc watching

That always spooked me about messing up my eyes for good

Adam



Sent from my iPhone using Tapatalk

[AKweldshop]

Lens is doing great.
It's my go to for just about anything.