[moostang]

I was wondering if anyone could tell me if the Vulcan TIG pedal will work with the Lincoln LE31MP. I realize a name brand one would probably be better quality, but for occasional home use it doesn’t seem to bad.

[Poland308]

The ohm range and the wire plug would need to match.

[moostang]

I can’t find much information about either one of them. The one that is for my welder is K4361-1 and I can’t even find it on the Lincoln site. I’m going to go to harbor freight and compare the plugs but I don’t know what the ohms are for either one.

[Poland308]

It should be listed in your manual. I would recommend a call to ck worldwide tech support. If you have your machine mn they can probably answer your questions about what your machine needs.

[moostang]

Okay thank you. I’ll do some more research.