Page 1 of 1
6g issue I'm frustrated
Posted: Tue Jan 14, 2014 7:36 pm
by kmcarr1983
Working on acquiring skills for 6g cert but I have a problem I'm right handed and on the "hard" side between the 5 &3 clock position I have very bad noticeable highs and lows tried varying heat tried changing my speed on the pass always use a file on the electrode for restart on the 7018 & 6016 my test is in 16 days which is in a trade school any suggestions would be appreciated
Re: 6g issue I'm frustrated
Posted: Tue Jan 14, 2014 7:57 pm
by admin
If the problem is due to stops and starts all in one area then staggering them will help. You might even need to stop early now and then just to spread them out
Thx for posting
Jody
Sent from my iPhone using
Tapatalk
Re: 6g issue I'm frustrated
Posted: Tue Jan 14, 2014 8:02 pm
by ksmrf
the hardest part for me was the left hand side. the way i do it i can't see the puddle so its hard to see if my speed is alright.
Re: 6g issue I'm frustrated
Posted: Wed Jan 15, 2014 11:04 am
by Mike
Welcome to the forum 1983.