Page 1 of 1
2in schedule 80 carbon with 309 stainless filler 6g
Posted: Sat Jan 11, 2014 12:57 am
by joshuanaaa
Im welding 2inch schedule 80 carbon steel, 1/8 309 stainless filler metal, argon purge and shielding gas, tight 1/8 gap for root. If you have any tips, tricks, or set up info on this process please respond. THANKS!
Re: 2in schedule 80 carbon with 309 stainless filler 6g
Posted: Sat Jan 11, 2014 6:36 pm
by joshuanaaa
Re: 2in schedule 80 carbon with 309 stainless filler 6g
Posted: Mon Jan 13, 2014 1:36 am
by AKweldshop
Nice welding Joshua?
Are you sure you need any help
John
Re: 2in schedule 80 carbon with 309 stainless filler 6g
Posted: Fri Feb 14, 2014 12:52 am
by AKweldshop
I can't believe it!
Two guys needing help on this test in a very short period of time.
Not to mention, Jody just made a video on that test.
here it is, part 1 and 2
http://welding-tv.com/?p=5265
http://welding-tv.com/?p=5271
If Joshua sees this, I hope it helps.
Good luck,
~John