Page 1 of 1

New guy from Florence AL

Posted: Sat Aug 22, 2015 4:53 pm
by Welder kurt
My name is Kurt and I'd thought I'd share my background with you all seeing that I'm new on the forum. I've been in CNC machining for 18 years running 5 axis mills machining everything from 6AL4V TI, Inconel, 304,316,17-4, and aluminum grades from 6061 to 7075 for the medical and aerospace industry, this has helped me a lot in my TIG welding endeavors, I've tigged stainless and duplex steels such as 304, 316, and HR120, and weld able grades of aluminum. I've got tons to learn and look forward to learning everything I can from the experts on here. My equipment at my shop consist of a Miller dynasty 280 DX tig runner and a hypertherm powermax 30 XP, I've also spent time on a ESAB comberex 200 CNC plasma table with a 15 ft by 20 ft sumbmerged burn table

Re: New guy from Florence AL

Posted: Sat Aug 22, 2015 5:08 pm
by Otto Nobedder
Well, Kurt, while we've spoken already on other topics, I will still say;

Welcome!

Another amazingly varied background! There are so many folk here from so many different and varied backgrounds that we've discovered none of us individually are experts outside of certain small niches.

The forum, cumulatively, is the expert here. There's so much knowledge, both documented and "tribal", that it's hard to imagine a question that can't be answered, even if a bit of research time is required.

We look forward to picking your brain at least as much as you anticipate learning what we can share.

Steve S

Re: New guy from Florence AL

Posted: Sun Aug 23, 2015 7:06 am
by Mike
Kurt welcome to the forum.