Welding Tips and Tricks

Good Ay

I am 62 years old and am a hobby welder. Bought a Kemppi Mastertig to try and learn TIG on aluminium.
Also bought a Thermal Dynamics plasma cutter. I am very much a project welder - so the project comes first and welding may or may not be a big part of any project. So I have a lathe and a milling machine and sometimes the project is completed without welding at all.

The long and the short of it is I am still a crap welder and need lots of practise but also have lots and lots to learn. So joining the forum and watching the videos has already been a help.

So thanks in advance for any help anyone manages to give me -

Mal
Toowoomba
Australia

Hi Mal, welcome to the forum. You have some serious welding and cutting gear there. Lots of good advice on this forum so ask away. I bet you are having a chilly morning up on the range cause it's brass monkey weather down below right now. I had to put on a jacket.
Cheers Vic.

Hello Mal, welcome to the forums. You'll learn just takes some practice and desire, seems you have both

Mal welcome to the forum.

Welcome Mal

How is the Kemppi working? Wondering to buy one myself