First Welding Project
Posted: Wed Apr 15, 2015 8:45 pm
Hello all! Not sure I'm posting in the correct forum, but here goes.
So I recently started welding, the only training I got was working in a factory beside a guy who repaired welds after the robots were finished with them. The rest is self taught, youtube videos and trial & error.
So this is a 1/4 inch aluminum diamond plate hydraulic reservoir for the dump bed & salter attachment. The welds and the bracket both failed, due to stress and riding over a snow bank
This is the Facebook Album of the completed work, before & after and the progress.
Thanks for viewing!
Ivan @ Brinkley Landscaping & Maintenance #FarmBoyCustoms
So I recently started welding, the only training I got was working in a factory beside a guy who repaired welds after the robots were finished with them. The rest is self taught, youtube videos and trial & error.
So this is a 1/4 inch aluminum diamond plate hydraulic reservoir for the dump bed & salter attachment. The welds and the bracket both failed, due to stress and riding over a snow bank
This is the Facebook Album of the completed work, before & after and the progress.
Thanks for viewing!
Ivan @ Brinkley Landscaping & Maintenance #FarmBoyCustoms