Page 1 of 1
Gunsmithing Student New to the Forums
Posted: Mon Mar 02, 2015 12:12 am
by mbarnes
Hi,
I am a gunsmithing student at Lassen Community College and have been learning to Tig weld as part of the program. I have only been Tig welding for about six months now and I am slowly getting the hang of it. Our instructor has been showing us Jody's videos and they have proved to be very helpful. Just wanted to say 'Hello' and introduce myself.
-Matt
Re: Gunsmithing Student New to the Forums
Posted: Mon Mar 02, 2015 6:44 am
by motox
matt
welcome to the forum.
besides jody's videos his site
also sells very helpful welding
products. give it a look.
craig
Re: Gunsmithing Student New to the Forums
Posted: Mon Mar 02, 2015 9:01 am
by Mike
Welcome to the forum Matt.
Re: Gunsmithing Student New to the Forums
Posted: Mon Mar 02, 2015 10:53 pm
by Superiorwelding
Matt,
Welcome to the forum! Gunsmithing is a interesting thing to me. At first, I could never figure out why gunsmiths needed to weld. Share some of your work and experiences with us when you can!
-Jonathan
Re: Gunsmithing Student New to the Forums
Posted: Mon Mar 02, 2015 11:02 pm
by xwrench
Greetings. Welcome to the forum. Some of the most beautiful welds I've ever seen were done by a gunsmith.
Re: Gunsmithing Student New to the Forums
Posted: Mon Mar 02, 2015 11:43 pm
by Otto Nobedder
xwrench wrote:Greetings. Welcome to the forum. Some of the most beautiful welds I've ever seen were done by a gunsmith.
A man with a gun can readily convince you that his welds are beautiful...
Welcome, Matt!
Steve S
Re: Gunsmithing Student New to the Forums
Posted: Tue Mar 03, 2015 12:40 am
by Coldman
Superiorwelding wrote:Matt,
At first, I could never figure out why gunsmiths needed to weld.
-Jonathan
Haven't you ever met a "gun welder" before?
Re: Gunsmithing Student New to the Forums
Posted: Tue Mar 03, 2015 8:43 pm
by xwrench
A man with a gun can readily convince you that his welds are beautiful...
Good point, but it was my gun
Cheers.
-Eldon
Re: Gunsmithing Student New to the Forums
Posted: Sun Mar 08, 2015 7:33 pm
by xwrench
I don't know the guy that did this weld but its sure pretty.
- image.jpg (43.2 KiB) Viewed 693 times