Page 1 of 1
new to forum
Posted: Sun Oct 26, 2014 7:46 am
by welder1971
new to forum,need help with sch. 80 6g stick test. have been welding and fabbing tanks and vessels for 15 years. bounced back and forth from pipe to a.s.m.e. coded vessels. have mastered flux core,spray arc, and sub arc. can tig pipe.but always slip up on sch 80 stick test. any help would be greatly appreciated.
Re: new to forum
Posted: Sun Oct 26, 2014 3:17 pm
by AKweldshop
welder1971 wrote:new to forum,need help with sch. 80 6g stick test. have been welding and fabbing tanks and vessels for 15 years. bounced back and forth from pipe to a.s.m.e. coded vessels. have mastered flux core,spray arc, and sub arc. can tig pipe.but always slip up on sch 80 stick test. any help would be greatly appreciated.
Welcome!!
Your in luck mate....
Watch this video.
http://welding-tv.com/2013/07/23/6g-tips-part-3/
~John
Re: new to forum
Posted: Mon Oct 27, 2014 5:38 am
by Mike
Welcome to the forum.
Re: new to forum
Posted: Mon Oct 27, 2014 9:19 pm
by Superiorwelding
Welder1971,
Welcome to the forum! What specific help do you need on your 6G?
-Jonathan
Re: new to forum
Posted: Tue Oct 28, 2014 8:07 pm
by Otto Nobedder
welder1971 wrote:new to forum,need help with sch. 80 6g stick test. have been welding and fabbing tanks and vessels for 15 years. bounced back and forth from pipe to a.s.m.e. coded vessels. have mastered flux core,spray arc, and sub arc. can tig pipe.but always slip up on sch 80 stick test. any help would be greatly appreciated.
Welcome!
So... sch. 80 carbon, 2" pipe? That's my guess, as the test is so common.
6010 down root and 7018 out?
Important details...
Steve S