My name is Eric, and I am new to the forums but I have been watching the videos for some time now. I am a pipefitter at the local shipyard and spend a bit of time tacking and sometimes welding up fixtures.
The welding and fitting is divided between departments where I work so I do not get to do as much welding as I would like. Since this is the case, I decided to buy and Everlast 160sth that will be here in two days for my own entertainment. The filler metals and processes are very proceduralized where I work so I dont feel like I have really understood the reason for selecting metals, techniques and the like.
I look forward to a place where I can field questions for welding at home, and tips to get better.
Thanks,
Eric
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
Eric,
Welcome to the forum! Buying that machine shows you want to learn, I hope we can help.
-Jonathan
Welcome to the forum! Buying that machine shows you want to learn, I hope we can help.
-Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Rtaylor777
- Rtaylor777
-
New Member
-
Posts:
-
Joined:Fri Jun 13, 2014 1:40 pm
-
Location:Quesnel, BC, Canada
Welcome to the forum 
I use a Multiplaz 3500 welder/cutter https://groups.google.com/forum/?hl=en# ... iplaz-3500