I was referred to the forum after watching some youtube vids on the 6G Tig welding test. I was recently hired as a pre-appprentice through the local Pipefitter's Union. I'm hoping to get a head start on my welding skills, so I'm signed up for a 5 month beginners Arc Welding class in August. Any advice would be appreciated. Thanks- Jason
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Welcome to the neigborhood, Jason,
You found the calmest, most useful welding forum on the internet. If you ask a question we can't answer (becoming less likely with each new member), several will research to FIND the answer, because we want to know, too.
Have a good read or search through the stick-welding topics, and you may find several questions you may not have thought of yet have been discussed.
Steve S
You found the calmest, most useful welding forum on the internet. If you ask a question we can't answer (becoming less likely with each new member), several will research to FIND the answer, because we want to know, too.
Have a good read or search through the stick-welding topics, and you may find several questions you may not have thought of yet have been discussed.
Steve S
Rtaylor777
- Rtaylor777
-
New Member
-
Posts:
-
Joined:Fri Jun 13, 2014 1:40 pm
-
Location:Quesnel, BC, Canada
Welcome to the forum Jason 
I use a Multiplaz 3500 welder/cutter https://groups.google.com/forum/?hl=en# ... iplaz-3500