Page 1 of 1
Gun Smith/Light Manufacture
Posted: Fri May 02, 2014 8:45 pm
by Rustystud
My name is Nathaniel Lambeth, Sr. I own and operate Custom Guns and Ammunition, L.L.C.. I Time and True rifle actions. I weld bolt handles. I build custom rifles for hunting and target shooting.
Nat Lambeth,
15 Sunflower Drive
Youngsville, NC 27596
nlambeth@customgunsandammunition.com
919 556-0554
Re: Gun Smith/Light Manufacture
Posted: Fri May 02, 2014 9:32 pm
by Otto Nobedder
Hi, Nat,
You were almost "refused", because all your introductory post contains is your business information. I looked at the profile you gave, and the equipment you use, etc. and decided to welcome you.
We're strict against commercial use of the site, but I'm happy to add a gunsmith to our ranks, if your interest is truly with welding.
Steve S
Re: Gun Smith/Light Manufacture
Posted: Sat May 03, 2014 1:11 am
by AKweldshop
Welcome to this welding forum.
Please do not put your website or contact info in any of your future posts.
Thanks,
~John
Re: Gun Smith/Light Manufacture
Posted: Sat May 03, 2014 7:04 am
by paul_s
Welcome to the forum Nat.
Re: Gun Smith/Light Manufacture
Posted: Sat May 03, 2014 8:16 am
by Superiorwelding
Rustystud,
Welcome, I have never welded on gun parts, lets see some pictures of your welding work.
-Jonathan
Re: Gun Smith/Light Manufacture
Posted: Sat May 03, 2014 10:26 am
by Mike
Welcome to the forum Nathaniel.