Page 1 of 1

Another loose nut under the hood

Posted: Thu May 01, 2014 7:57 pm
by Jonnie Fraz
Hey boys and girls. Been lurking here for a bit and figured I better register...Not sure if I will have anything to contribute, but I will try like hell. I can not thank Jody enough for taking the time to make these videos for all of us. I have learned so much from them.
I am the head fabricator for a small construction company that builds awnings and shade structures. I always say if you live in Sacramento you have seen my work.
I have been welding longer than I haven't at this point, and I can't see when I will stop doing it. I try to learn something new as often as I can which is why I am here.

Thanks guys
Jonnie

Re: Another loose nut under the hood

Posted: Thu May 01, 2014 8:51 pm
by Superiorwelding
Jonnie,
Welcome to the forum! If you have been welding that long you should have quite a bit to contribute! See you around the forum.
-Jonathan

Re: Another loose nut under the hood

Posted: Thu May 01, 2014 9:25 pm
by AKweldshop
Welcome.

I say that if you see a trailer driving around AK, more then likely my welds are holding it together.

My advice,
Stay as far away from trailers on the road up here.

~John :D

Re: Another loose nut under the hood

Posted: Fri May 02, 2014 7:20 am
by Mike
Welcome to the forum Jonnie.

Re: Another loose nut under the hood

Posted: Fri May 02, 2014 7:25 am
by paul_s
Welcome to the forum. I'm sure that you have something to contribute.