Welding Tips and Tricks

Posted: **Wed Apr 02, 2014 4:44 pm**

Hi, and thanks for allowing me to join and learn from all of you. I'm no expert at welding, but I have blasted a lot of 6011 into a huge sailboat cradle and a couple trailers. Love that old AC 225 Buzz Box for sure!!

I just picked up an Lincoln Weldanpower AC/DC 225 6 and will be restoring it to serviceable condition soon. Very excited about it, and my new forum HERE with you guys! Thank you!

Brian

Posted: **Wed Apr 02, 2014 7:41 pm**

Welcome, Brian!

"kombisutra"... That's original, and I love it! (No pun intended.)

Post a question, or start a topic, at your leisure...

Steve S

Posted: **Wed Apr 02, 2014 9:10 pm**

Welcome to the forum.

Posted: **Wed Apr 02, 2014 9:39 pm**

Welcome mate....
Your gonna love that DC machine!!
I got a AC225 at 13years old, Learned on it, and then got a DC machine, and can make welds like this

: IMG_0686.JPG (42.9 KiB) Viewed 346 times

You need to get some 1/8 7018 and set that machine at 140amps, get some scrap 1/4 in steel, and get practicing....
Good luck,
~John

Posted: **Thu Apr 03, 2014 9:41 am**

Welcome to the forum Brian.

Welding Tips and Tricks

Checking In From Bagram

Checking In From Bagram

Re: Checking In From Bagram

Re: Checking In From Bagram

Re: Checking In From Bagram

Re: Checking In From Bagram