Hi to all
Posted: Tue Jan 14, 2014 6:27 pm
I have watched many of the Welding Tips & Tricks videos and would like to learn more from the Pros and novice. I currently have a Lincoln SP-170T Mig machine and a new Miller Dynasty 200DX will be delivered tomorrow.
Current projects are 1959 Cushman Eagle which has been taken down to bare frame for a repaint and replace and/or repair the short cuts done by it's previous builder. Second project is a 1930 Ford Coupe which will involve lots of welding so with practice, practice, practice and you guys I hope to get this project moving.
For my shop I wanted to fabricate some shelving so I can better store the multitude of spray cans, I have a sheet of 6061-0 which I plan on using. So again I say hi to all.
Mike m.
Current projects are 1959 Cushman Eagle which has been taken down to bare frame for a repaint and replace and/or repair the short cuts done by it's previous builder. Second project is a 1930 Ford Coupe which will involve lots of welding so with practice, practice, practice and you guys I hope to get this project moving.
For my shop I wanted to fabricate some shelving so I can better store the multitude of spray cans, I have a sheet of 6061-0 which I plan on using. So again I say hi to all.
- image.jpg (59.96 KiB) Viewed 365 times
