Page 1 of 1
Hi from Brisbane Australia
Posted: Sat Jan 11, 2014 9:58 pm
by wayne66
Hi to everyone I am still a beginner finding my way around tig welding have done some carbon steel as well as stainless , and aluminium. love the aluminium but still my welds have a lot to be desired
I tend to get out of position and the setting stump me
just gone through my first tank of argon so more to come.
So got lots of reading to do here and you tube to watch
Cheers Wayne
Re: Hi from Brisbane Australia
Posted: Sat Jan 11, 2014 10:22 pm
by Otto Nobedder
Welcome, Wayne,
You'll find many cohorts from OZ are here with you!
Steve S
Re: Hi from Brisbane Australia
Posted: Sat Jan 11, 2014 10:40 pm
by weldin mike 27
Hey,
Im one of the cohorts from down in Vic.
Mick
Re: Hi from Brisbane Australia
Posted: Sun Jan 12, 2014 12:27 am
by AKweldshop
Welcome to the forum Mate
Re: Hi from Brisbane Australia
Posted: Sun Jan 12, 2014 5:56 am
by Fat Bob
Welcome to the site Wayne. Enjoy your stay and ask all the questions you want.
Re: Hi from Brisbane Australia
Posted: Sun Jan 12, 2014 3:41 pm
by Mike
Wayne66 welcome to the forum.
Re: Hi from Brisbane Australia
Posted: Mon Jan 13, 2014 2:08 am
by wayne66
Thanks for the warm welcome
Re: Hi from Brisbane Australia
Posted: Mon Jan 13, 2014 2:09 am
by AKweldshop
You bet, Wayne
Glad you stopped by....
John