New member: Phnug from South Africa
Posted: Sun Dec 01, 2013 6:58 am
Hello everyone,
I watch everything on Jody's YT channel and finally plucked up the GO to join the forum.
For the curious about the username I wanted "Snug" on YouTube, you know like when you snug a nut or bolt down. It was not available so while trying various permutations "Phnug" was available and that's the way it stayed ...
I love working in my home-shop and will share some items of interest and may have a question
To start see quick photo of my home built welding table. It has a 3" matrix of holes I use with the Stronghand clamps to hold jobs. The clamps were fitted with a more robust 12mm (approx 1/2") bottom pin and the holes drilled to suit. I could post more detail when I know my way around the forum as there may be a related thread.
See you later ...
I watch everything on Jody's YT channel and finally plucked up the GO to join the forum.
For the curious about the username I wanted "Snug" on YouTube, you know like when you snug a nut or bolt down. It was not available so while trying various permutations "Phnug" was available and that's the way it stayed ...
I love working in my home-shop and will share some items of interest and may have a question
To start see quick photo of my home built welding table. It has a 3" matrix of holes I use with the Stronghand clamps to hold jobs. The clamps were fitted with a more robust 12mm (approx 1/2") bottom pin and the holes drilled to suit. I could post more detail when I know my way around the forum as there may be a related thread.
See you later ...