Hi from NewZealand
Posted: Thu Oct 24, 2013 6:00 pm
Hello to everyone , my name is Kevin , i have been in the engineering field since i left school 35 years ago . I'm trade certified in fitting turning and machining , have held all positions certificates in stick welding since then .
ive dabbled a bit in alloy and stainless welding, mostly the heavy stuff, all my alloy welding was done with oxy acetylene . now you can't even buy the ali-flux for that anymore , i splashed out and brought a lincoln 205t inverter and all the necessary parafinalia for tig welding . i also have a 200 amp mig , a lathe and a milling machine . now theres only room in the shed for 1 vehicle
I'm looking forward to building a few projects where i can use all my tools and get an excellent quality finished project .
cheers kevin
ive dabbled a bit in alloy and stainless welding, mostly the heavy stuff, all my alloy welding was done with oxy acetylene . now you can't even buy the ali-flux for that anymore , i splashed out and brought a lincoln 205t inverter and all the necessary parafinalia for tig welding . i also have a 200 amp mig , a lathe and a milling machine . now theres only room in the shed for 1 vehicle
I'm looking forward to building a few projects where i can use all my tools and get an excellent quality finished project .
cheers kevin
