New
Posted: Thu Jun 06, 2013 10:25 pm
I'm from the UK and want to learn to weld up a new cradle for my boat.
Bought a cheap 160amp arc welder and have practiced a bit and seem to be slowly putting down welds
That are not looking like rat s--- as in beginning.
The cradle I have to weld up is 3" 5mm box section.
Settings and rod choice be appreciated.
Bought a cheap 160amp arc welder and have practiced a bit and seem to be slowly putting down welds
That are not looking like rat s--- as in beginning.
The cradle I have to weld up is 3" 5mm box section.
Settings and rod choice be appreciated.