Page 1 of 1
Hi all
Posted: Fri May 31, 2013 3:54 pm
by italianwelder
Hi all i am a italian, i have 45 years old i work in a company of maintenace and metal construction (pipeline and other)
I have a cetification for carbon steel (tig & electrode).. i am here for gain experience to increase my skills'..
I am sorry for my bad language.. i hope undestand..
Happy welding and have a nice week 4 all and family
Carlo
Re: Hi all
Posted: Fri May 31, 2013 4:14 pm
by Alexa
Italianwelder.
Welcome.
Please comment.
Probably the welding codes are a little different in Europe than other places across the globe.
Do you do any cellulose rod (6010 etc.) downhill on the pipelines?
Tanks.
Alexa
Re: Hi all
Posted: Fri May 31, 2013 5:54 pm
by Otto Nobedder
Welcome, Carlo,
Don't worry about your skills in English. I know people for whom English is their only language who are harder to understand.
Again, Benvenuti!
Steve S
Re: Hi all
Posted: Sat Jun 01, 2013 8:44 am
by Mike
Welcome to the forum.
Re: Hi all
Posted: Sat Jun 01, 2013 11:42 am
by italianwelder
Alexa wrote:Italianwelder.
Welcome.
Please comment.
Probably the welding codes are a little different in Europe than other places across the globe.
Do you do any cellulose rod (6010 etc.) downhill on the pipelines?
Tanks.
Alexa
U.S. is ANSI and Europe is UNI but Citoflex (6010) is standard,many use a citoflex , but now in a raffinery prefer a tig 1° pass and 2° & final pass 7018 or PH35 S
Tnx 4 all
Carlo
Re: Hi all
Posted: Sat Jun 01, 2013 7:25 pm
by Alexa
Italianwelder.
Is that citoflex (6010)for the root pass ever used downhill (welding from top to bottom)?
How does that PH35-S rod weld compared to other major brands (for example like Lincoln, Esab, Kobe, etc.)?
Tanks.
Alexa
Re: Hi all
Posted: Sat Jun 08, 2013 5:08 pm
by italianwelder
Alexa wrote:Italianwelder.
Is that citoflex (6010)for the root pass ever used downhill (welding from top to bottom)?
How does that PH35-S rod weld compared to other major brands (for example like Lincoln, Esab, Kobe, etc.)?
Tanks.
Alexa
This mode (downhill) is not accept here 1°st pass 6010 upright and 2° et 3° pass only basic electrode, here call this mode of weld (downhill) "american mode". All refinery (ENI, Snam etc...) in europe is not legal, PH35 S is a good basic electrode make from Philips is many workable,Esab for pipe is too hard is good for Steel construction ( for my personally) Lincoln i a good for all employ, here i use Oerlikon electrode Oerlikon make a PH 35 S basic electrode