Page 1 of 1

learning very thin tig

Posted: Fri May 10, 2013 8:20 pm
by krazziee
Hello all,
trying to learn how to tig very thin alum. and S/S

Re: learning very thin tig

Posted: Fri May 10, 2013 8:32 pm
by Otto Nobedder
Welcome!

It requires good equipment. Not all machines perform well in the 3-8 amp range one needs to weld beer cans together...

How thin are you talking? I've welded .049 tubing in both Al and SS, down to 3/8".

"Pulse" feature is a big plus.

Steve S

Re: learning very thin tig

Posted: Wed May 22, 2013 6:09 am
by krazziee
thanks Steve,
i have played with the pulse some, and will work with it more, but i seem to do better without it.
thank for the info.
Richard