INTRO
Posted: Tue Dec 15, 2020 7:05 pm
Hi, did some TIG in my training 30 years ago, was always proficient at oxy/acetylene
Finally can afford a decent TIG machine AC/DC pulse, actually got 2 machines now as i bought both faulty
and fixed myself.
My profession is as an Avionics Tech, but also trained as an aircraft mechanic so have some experience and knowledge
particularly with aluminium sheet metal on aircraft and also metallurgy exposure.
Looking around the web, Jody has the best info and videos available,and as he welds aircraft components as well,
I knew this was the best TIG welding site on the net.
Would like to see an index heading for repairing and technical help for welder issues.
Happy to contribute my very limited knowledge and a few schematics, but really need a guru to assist.
regards
XLAND
Finally can afford a decent TIG machine AC/DC pulse, actually got 2 machines now as i bought both faulty
and fixed myself.
My profession is as an Avionics Tech, but also trained as an aircraft mechanic so have some experience and knowledge
particularly with aluminium sheet metal on aircraft and also metallurgy exposure.
Looking around the web, Jody has the best info and videos available,and as he welds aircraft components as well,
I knew this was the best TIG welding site on the net.
Would like to see an index heading for repairing and technical help for welder issues.
Happy to contribute my very limited knowledge and a few schematics, but really need a guru to assist.
regards
XLAND
