Hello from Canada with a question about an old welder
Posted: Wed Sep 02, 2020 2:41 pm
Hi from Ontario Canada.
I recently picked up a linde HDA 300. Tested it out and everything seams to be working. I cant find a manual, not surprising, but their are some thing on the machine that I don’t know what they are for or how to make them work. Any help would be appreciated.
My first question is what does the phase shit and intensity do to the high frequency.
The second is how do you adjust the post purge time. I mean i would have though you move the black arrow clockwise and the red arrow moves towards it and stops when it get to the black one. The thing is that it moves counterclockwise. Any ideas
Final question is what is the timed weld mode do.
I posted a pic of the front panel for reference.
Thanks a bunch and looking forward to be part of this community
Pat
I recently picked up a linde HDA 300. Tested it out and everything seams to be working. I cant find a manual, not surprising, but their are some thing on the machine that I don’t know what they are for or how to make them work. Any help would be appreciated.
My first question is what does the phase shit and intensity do to the high frequency.
The second is how do you adjust the post purge time. I mean i would have though you move the black arrow clockwise and the red arrow moves towards it and stops when it get to the black one. The thing is that it moves counterclockwise. Any ideas
Final question is what is the timed weld mode do.
I posted a pic of the front panel for reference.
- 20200902_082334.jpg (125.07 KiB) Viewed 454 times
Pat