Page 1 of 1
Hello from NH
Posted: Sat Mar 28, 2020 12:29 am
by B18a1crxsi
Hello, my name is Andrew. Im new to tig welding. I have a question but dont know where to post or if im even allowed to yet.
Re: Hello from NH
Posted: Sat Mar 28, 2020 11:37 pm
by TraditionalToolworks
B18a1crxsi wrote:Hello, my name is Andrew. Im new to tig welding. I have a question but dont know where to post or if im even allowed to yet.
Welcome to the forum Andrew.
You can post to any of the forums available.
If you have a tig question, probably the "Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding" forum would be the best place.
http://forum.weldingtipsandtricks.com/viewforum.php?f=5
Re: Hello from NH
Posted: Sun Mar 29, 2020 12:01 am
by bap_
Welcome Andrew!
Feel free to post here until you have access to other parts of the forum.
Re: Hello from NH
Posted: Sun Mar 29, 2020 12:26 am
by TraditionalToolworks
bap_ wrote:Welcome Andrew!
Feel free to post here until you have access to other parts of the forum.
bap,
Do you not get access to the forum when you register? Maybe the admins need to approve it...??? (that must be
)
Andrew,
Sorry if I misled you...forgot about that dilemma...one of the admins should be around soon to take care of that.
Re: Hello from NH
Posted: Wed Apr 01, 2020 1:07 am
by bap_
IIRC you are required to make a first post in the new members area, then you get approved after that manually by a moderator.